A Residential Plumbing permit is required for any of the following projects:
- New sewer or water connections
- Disconnection of sewer or water connections
- Installing new plumbing equipment/fixtures
- Replacing or repairing plumbing equipment/fixtures
Mechanical, electrical and plumbing permits, commonly referred to as “trades permits” do not require plans. Trade permits can be obtained online after the associated building permit is issued.
Some plumbing permits may require wastewater and/or health approval prior to issuance.
Alternatively, a Household Appliance permit may be used for the direct replacement of an existing appliance, including fuel-fired appliances, within a residence that requires one final inspection only.
Note: Some residential properties (example: apartment buildings and condos) are considered commercial per the building code and therefore require commercial building permits. To be considered residential, a project must consist of a detached one- or two-family dwelling or townhouse and be no more than three stories high above ground level, as defined by code.
ON THIS PAGE
This information is the most common for how to obtain the necessary approval for your project and is not representative of all the conditions you may encounter.
WHO SHOULD APPLY?
Property owners may obtain permits in their own name, however, it is strongly recommended a properly licensed contractor pull the permits as the responsible party so the county can better assist in gaining compliance for defective work.
PLAN AHEAD
Before submitting, ensure you are aware of all applicable regulations and conditions that could affect your project to avoid surprises during the review process. Some of those factors include:
- Zoning Information
- Design Codes and Standards
- Do I Need to Hire a Registered Design Professional (RDP)?
- Floodplains
- Resource Protection Areas (RPA)
- Grading/Site Plans
- Parking Tabulation
- Types of Soils and Problem Soils
- Researching Site Conditions
To get a detailed description about each regulation and condition, visit our Plan Ahead page.
HOW DO I SUBMIT MY RECORD?
PLUS Application
Apply for your residential plumbing building record online in PLUS under the Building tab. If you are a first-time user, you must first register for an account.
Instructional Videos for PLUS
Helpful Instruction Guide:
Requirements
Depending on the scope of your project, one or more of the following may be required:
First Submission
- Reference the parent building permit number if the proposed scope of work was shown on a previously approved set of Architectural/Structural Plans.
- If plans were previously approved under a residential new building (BLDR) or residential addition/alteration (ALTR) permit, plans do not need to be uploaded with this record.
- Architectural/Structural Drawings
- If work was not shown on a separately approved building permit (noted above), provide plans meeting the necessary minimum submission requirements.
- Fairfax Coversheet
- If work was not shown on a separately approved building permit (noted above), upload the Fairfax Coversheet document separately from the plan coversheet contained within your architectural/structural drawings.
- Permit Authorization
- Required if the applicant is not the owner and is not a licensed contractor.
- Property Ownership Affidavit
- Required if the owner information does not match current tax records, often when there is a new owner.
- License Exemption Affidavit
- Required if a licensed contractor is not listed on the application.
- Projects located in the towns of Clifton or Vienna require separate approvals from the respective towns.
- Approval documentation from the appropriate township must be uploaded to your PLUS record, via the Digital Plan Room, and named accordingly (e.g., Town of Vienna Approval).
Subsequent Submissions
If corrections are required, you will receive an email with links and instructions to make corrections and resubmit.
- “Issues” are comments from reviewers, which require an applicant response before resubmitting. Please respond to each “open” comment.
- Prior to responding to comments and uploading revised plans/documents, navigate to the “Fees” tab and pay any outstanding resubmission fees.
- Once complete, respond to all “open” issues, upload updated plans and/or documents, if needed, and complete your resubmission.
For further assistance, please refer to the below videos for step-by-step guidance on the resubmission process:
Helpful Videos:
Reviewing Issues, Conditions, & Notes in PLUS - YouTube
Upload Corrected Plans in PLUS - YouTube
Helpful Instruction Guides:
What's Next?
To get a step-by-step guide on PLUS statuses and what they mean, see our What is My PLUS Status? Building Plans Infographic.
Review Process
Staff from the Permit Application Center, Health Department (if on well or septic), and Wastewater may review your package for completeness and compliance with the building code and county ordinances. You will be notified of any deficiencies. Plan corrections, resubmission fees and additional supporting documents may be required.
- Queue Times
- Fees
- Workflow Routing Slip to track review and plan assignment
For a detailed summary of application progress, to include the name(s) of assigned review staff, click on “Reports” in the top-right corner of the PLUS screen, when you are in a specific record, and select “Workflow Routing Slip Report.”
Permit Issuance
Once all reviews are approved and fees have been paid, your permit card and approved plans (if applicable) will be available to download from PLUS. You will also receive a link via a PLUS email notification.
Helpful Video:
Access Approved Plans in PLUS - YouTube Video
Building Inspections
Once the permit is issued and you begin construction, you are required to obtain inspections from the county for your project. The county must be notified when the stages of construction are reached that require an inspection. For more information, see our inspections webpage.
Helpful Video:
Building Inspections (an overview on how to schedule an inspection) - YouTube Video
