Next Event: Park Authority Board, Committee of the Whole (Discussion)
Wednesday, February 28, 2018, 6:30 PM
12055 Government Center Parkway, Suite 941, Fairfax, VA 22035
The Park Authority Board’s Committee of the Whole will discuss the status of the project and its next steps. The public is welcome to attend and observe this meeting; however, Committee meetings do not typically include public comment. Written comments are still welcome at: email@example.com.
Please visit the Park Authority Board and Committee page, where the agenda item will be posted when available.
THANK YOU FOR YOUR FEEDBACK AND INVOLVEMENT
Thank you to all who attended the public meeting on December 11, 2017 and who provided comments – by phone, email, social media, and in person. In the coming weeks, the project team will be considering this new information and presenting its recommendations on Lake Fairfax and Popes Head Park to the Park Authority Board.
In your feedback, we heard that there is desire for new places to fly UAS and the benefits, from recreation, to STEM education, to institutional and commercial uses. However, such a program must consider public safety; how others use our parks; any impacts to wildlife and habitat; and how UAS use affects the surrounding neighbors.
The project team will review all comments received and present its recommendations to the Park Authority Board in February. If any additional outdoor use is recommended and endorsed by the Park Authority Board, our staff will work closely with our partner organizations to minimize any identified issues, with the primary goal of providing a safe, sustainable, and respectful program. The Park Authority is planning to introduce a series of UAS-related classes and programs later this year at indoor locations and may make limited, scheduled use of outdoor locations, if appropriate.
Please continue to visit this page for additional information on UAS in the park system as it becomes available. If you have questions, please contact us at firstname.lastname@example.org.
Again, thank you! Your participation has given us greater insights into this new and emerging technology, and how we might better serve our communities.
As unmanned aircraft systems (“drones”) have surged in popularity, county parkland has become an in-demand location for this emerging technology. Currently, drone pilots may take off and land at Poplar Ford Park under a partnership with Northern Virginia Radio Control, a model aircraft organization.
The Park Authority undertook a study in 2017 to determine how it could provide new opportunities for drone users while ensuring public safety, protecting its lands and natural resources, and continuing to provide quality recreational experiences and programming for all park visitors.
The Park Authority is considering expanding drone use to one or two additional sites in the coming year. Sites would be operated in partnership with a qualified club or organization, with locations and schedules carefully chosen to minimize impacts to existing park activities and resources. Public input is a key part of this selection process. Parks currently under consideration are Lake Fairfax Park and Popes Head Park.
Drone pilots are expected to abide by all applicable laws, Federal Aviation Administration requirements, and Park Authority regulations. More information for pilots can be found at:
For additional questions, please contact the Park Authority’s Public Information Office at 703-324-8662 or email@example.com
6704 Bull Run Post Office Road
Flying time is daily from 9 a.m. to sunset
Radio controlled model aircraft use at Poplar Ford Park is an approved use by the Fairfax County Park Authority (FCPA). The Northern Virginia Radio Control Club (NVRC) and the FCPA share a Memorandum of Agreement (MOA) giving permission to NVRC to use this site for radio controlled model aircraft use. Anyone desiring to participate in radio controlled model aircraft use must be a member of NVRC or an invited guest in compliance with the rules of the MOA.
All users shall comply with the Field Rules or are subject to loss of the privilege of participating in radio controlled model aircraft activities. The RC model aircraft use area is closed to non-participants during hours scheduled for flying. For your own safety please keep out of the area.
A Board of Governors administers the agreement between NVRC and FCPA. The representatives are:
NVRC - Mark Franke
FCPA - Troy Miller
Citizen Representative - Hal Strickland
NVRC Safety Officer – Patrick Dunlap
FIELD ETIQUETTE AND RECOMMENDED OPERATING PROCEDURES
- Each member is responsible for removing personal trash
- RC model aircraft users shall use the appropriate preflight inspection and/or initial inspection checklist provided by the Sponsor prior to the first flight of the day on each aircraft to be flown
- RC model aircraft users and escorted guests only are allowed on North side of the spectator fence. An escorted guest is one who is under the direct supervision of an RC model aircraft user. The guest should have been briefed by the RC model aircraft user as to proper, safe behavior, and should be acting in a responsible manner. The guest should never be at the impound area, on the flight line, walking among other pit areas unsupervised, or be inattentive to the hazards of the field
- It is recommended that RC model aircraft use be done North of the runway whenever practical
- Taxiways are defined at the East and West ends of the pilot area, and at the edge of the runway just North of the Foul Line. Aircraft should not be taxied in the area between the pilot line and the transmitter impound stand, nor into the pits
- Takeoff should not commence from the taxiways
- Runway usage should be controlled by good communications between flyers
- AMA guidelines for propeller spinners or safety nuts should be followed whenever practical
- Engines should not be stopped by contact with the spinner or propeller except in emergencies
- Engine restarts on the runway are not recommended
- Transmitters should be marked with the owner's name clearly visible
- If others are waiting for the frequency pin, the maximum time allowed for engine testing/other maintenance and flight should be 15 minutes.